Ensure that all vehicles electronics are in the off position and try again. If this does not solve the problem it is possible that electrical loads like Headlights, Door lights, Trunk light or accessories plugged into the 12V socket have caused the battery to drain and these things are still on. Ensure there is no corrosion present on the battery terminals and ensure the clamps have a solid connection. Poor contact with the terminals is the primary cause of the blinking green light after connection. If the the light continues to blink after the clamps have been correct attached to battery terminals then it is an indication that the jump starter did not make the connection with the battery smoothly. The blinking green LED light indicates that you have activated the jump starter and it has entered a standby mode wherein it is waiting to connect to the the battery where it will search for both voltage and correct polarity, or placement of the clamps. If you are trying to jump start an extremely large engine or diesel the jump-starter may not have enough cranking power to turn it over and you need a larger jump starter. If you are sure your vehicle is in good working condition you may not have enough charge in the jump-starter to turn over your engine, please recharge the jump-starter and try again. If your jump-starter’s LED does transition from blinking green to solid green there could be a problem with your vehicle including no fuel, ignition problems or starter problems it may be time to call a mechanic. If this is the case the battery may be severely damaged and it is not safe to jump-start your vehicle. If you are still experiencing problems your vehicle battery voltage may be below 3V even with a good connection and electrical loads turned off. Carefully clean the corrosion on your battery terminals and wiggle the clamp to ensure a solid connection. If your jump-starter continues to blink green the most common cause is a poor connection, the jump starter may not be making solid contact. Once connected to the vehicle battery the jump-starters status LED should change from blinking green to solid green to indicate that it is ready to jump start. There are several conditions that might be affecting your jump-starter. SafeJump technology ensures spark-proof operation and protects against reverse polarity, reverse current, over temperature and low voltage. Unlike conventional jump-starters, the safety system is internally mounted which enables it to monitor critical components of the jump-starter. SafeJump Technology- Our exclusive SafeJump™ Technology features the most advanced safety system on the market. The PowerHub App also features an interactive step-by-step guide that dynamically walks you through the jump-starting process.
#LITHIUM CAR BATTERY JUMP STARTERS BLUETOOTH#
The integrated Bluetooth Low Energy technology pairs directly with your smartphone and connects to our free PowerHub App for advanced battery monitoring and charging alerts. PowerHub App- Not only will the jump-starter hold a charge for an entire year but it’s smart enough to notify you when it needs to be recharged. The integrated 200 lumen LED work-light is essential for jump-starting in the dark and features low, high and SOS modes. IP65 weatherproof construction is designed for use in all weather conditions including rain, sleet and snow. The convenient 2.4Amp USB port allows you to quickly charge your smartphone or tablet while on the go (up to 3 smartphone recharges per charge).
With 1100 Peak Amps this jump-starter is powerful enough to start 4, 6 and 8-cylinder gasoline engines with up to 6 liters of displacement and up to 3 liters on diesel engines (up to 40 jump-starts a single charge). Never get stranded with the App enabled Lithium-Ion Jump-Starter from Duracell. The convenient 2.4Amp USB port allows you to quickly charge your smartphone or tablet while on the go.įor more details on the PowerHub App Click Here
0 kommentar(er)
